Dam Report

Simpson Reservoir (Jackson) dam

Oregon, USA Ramsey Canyon Hazard Low
Today high
--
Tonight low
--
Dam height
26ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Simpson Reservoir (Jackson) -- None dam
Simpson Reservoir (Jackson) None · Ramsey Canyon
About this dam

Simpson Reservoir (Jackson)

Simpson Reservoir, also known as Ramsey Canyon Dam, is a privately owned water resource located in Jackson, Oregon. Built in 1967, this earth dam serves the primary purpose of irrigation along the Ramsey Canyon stream. With a storage capacity of 90 acre-feet, the reservoir covers a surface area of 8.17 acres and has a drainage area of 0.18 square miles.

Managed by the Natural Resources Conservation Service, Simpson Reservoir stands at a height of 27 feet and has a hydraulic height of 24 feet. Despite its low hazard potential and an unassessed condition, the reservoir is subject to regular state inspections, permitting, and enforcement to ensure its safety and compliance with regulations. With a maximum discharge capacity of 35 cubic feet per second, the dam plays a crucial role in supporting agricultural activities in the region.

Situated in Rogue River, Oregon, Simpson Reservoir remains a vital water source for irrigation purposes in the area. Its construction and operation are overseen by the Oregon Water Resources Department, highlighting the importance of proper water management and infrastructure maintenance in the face of changing climate patterns and water resource challenges. As a key player in the local water supply system, the reservoir contributes to the sustainable use of water resources in Jackson County and serves as a valuable asset for the community.

StateNone
River / streamRamsey Canyon
NID IDOR00439
Owner typePrivate
Primary purposeIrrigation
Dam typeEarth
Year built1967
Dam height26 ft
Dam length800 ft
Max storage90 AF
Normal storage73 AF
Surface area8.2 ac
Drainage area0.2 sq mi
Hazard potentialLow
ConditionNot Rated
Last inspectionFri, 02 Jan 2015 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Simpson Reservoir (Jackson) -- inflows here typically show up in storage 24-72 hours later.

Track Simpson Reservoir (Jackson) in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Simpson Reservoir (Jackson)

Where does the data for Simpson Reservoir (Jackson) come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Simpson Reservoir (Jackson).