Frozen Lake Dam Reservoir Report

Last Updated: December 6, 2025

Frozen Lake Dam, located in Lake Toxaway, North Carolina, is a picturesque masonry dam built in 1934 for the primary purpose of recreation along Frozen Creek.


°F

°F

mph

Wind

%

Humidity

Summary

With a hydraulic height of 18 feet and a structural height of 20 feet, the dam stands at a length of 116 feet and holds a normal storage capacity of 85 acre-feet. The dam's location in Transylvania County adds to its charm, providing a serene setting for water resource and climate enthusiasts to explore.

Despite its age, Frozen Lake Dam has a high hazard potential, yet its condition assessment remains unrated. The last inspection conducted on the dam dates back to June 1980, raising concerns about its current safety and maintenance status. The dam's emergency action plan (EAP) readiness and risk management measures are not specified, highlighting the need for increased attention and monitoring to ensure the dam's structural integrity and safety for the surrounding community.

As a privately owned structure, Frozen Lake Dam presents a unique opportunity for conservation efforts and enhanced collaboration between the owners and regulatory agencies. With its historical significance and scenic beauty, the dam serves as a valuable resource for both recreation and environmental preservation, making it a focal point for water resource and climate enthusiasts to appreciate and protect for future generations.

Year Completed

1934

Dam Length

116

River Or Stream

Frozen Creek

Primary Dam Type

Masonry

Surface Area

7

Hydraulic Height

18

Nid Storage

85

Structural Height

20

Hazard Potential

High

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.