Adams Pond Dam Reservoir Report
Last Updated: December 5, 2025
Adams Pond Dam, located in Taylorsville, North Carolina, is a privately-owned structure on Glade Creek-Tr that serves primarily for recreational purposes.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam has a hydraulic height of 17 feet and a structural height of 20 feet, with a length of 300 feet and a storage capacity of 29 acre-feet. The dam's surface area covers 3.7 acres within a drainage area of 203 square miles.
Despite being classified as having a significant hazard potential, Adams Pond Dam is currently in fair condition as of its last inspection in December 2018. The dam does not fall under state jurisdiction or regulation, and while it is inspected regularly, there are no state permitting or enforcement actions associated with it. With its picturesque location and contribution to local recreation, Adams Pond Dam stands as a noteworthy feature in the water resource and climate landscape of Alexander County, North Carolina.
Dam Length |
300 |
River Or Stream |
Glade Creek-Tr |
Primary Dam Type |
Earth |
Surface Area |
3.7 |
Hydraulic Height |
17 |
Drainage Area |
203 |
Nid Storage |
29 |
Structural Height |
20 |
Hazard Potential |
Significant |
Nid Height |
20 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Adams Pond Dam