Walden Two Dam Reservoir Report
Last Updated: December 13, 2025
Walden Two Dam, located in Mecklenburg, North Carolina, is a privately owned structure regulated by the NC Dam Safety Program.
°F
°F
mph
Wind
%
Humidity
Summary
The dam's primary purpose is irrigation, serving as a vital resource for the surrounding area. With a hydraulic height of 18 feet and a structural height of 25 feet, Walden Two Dam has a storage capacity of 32 acre-feet and covers a surface area of 1.8 acres.
Despite its fair condition assessment as of January 2020, Walden Two Dam has a high hazard potential, highlighting the importance of regular inspections and maintenance to ensure the safety of the surrounding community. The dam is part of a tributary to McKee Creek and falls under the jurisdiction of the NC Department of Environmental Quality. The last inspection date was in January 2020, with inspections occurring every 2 years to monitor the dam's integrity.
As an earth dam with a length of 290 feet, Walden Two Dam plays a crucial role in managing water resources in the area. With its significant storage capacity and strategic location, the dam serves as a key infrastructure for irrigation purposes. However, its high hazard potential necessitates ongoing monitoring and adherence to regulatory guidelines to mitigate any potential risks associated with its operation.
Dam Length |
290 |
River Or Stream |
Trib to McKee Creek |
Primary Dam Type |
Earth |
Surface Area |
1.8 |
Hydraulic Height |
18 |
Drainage Area |
23 |
Nid Storage |
32 |
Structural Height |
25 |
Hazard Potential |
High |
Nid Height |
25 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Walden Two Dam