Matthews Pond Dam Reservoir Report
Last Updated: December 15, 2025
Matthews Pond Dam in Florence, South Carolina, stands at a height of 10 feet and has a NID storage capacity of 96 acre-feet.
°F
°F
mph
Wind
%
Humidity
Summary
This dam, with a normal storage capacity of 36 acre-feet and a surface area of 15 acres, plays a crucial role in water resource management in the region. Although the hazard potential of the dam is currently undetermined and its condition has not been rated, its significance in providing water storage and management cannot be overlooked.
Located at a latitude of 33.9426 and a longitude of -79.6697, Matthews Pond Dam serves as a vital component of the local water infrastructure. Despite not being regulated by the state and lacking specific purposes or dam types listed, the dam's importance in maintaining water levels and supporting the surrounding ecosystem is undeniable. With its capacity to hold 96 acre-feet of water, the dam contributes to the overall water management strategy in the area.
While the specific details of the dam's construction and history remain unknown, its presence and functionality are essential for the local community. As water resource and climate enthusiasts continue to monitor and assess the impact of dams like Matthews Pond Dam on the environment and water systems, understanding its role in the broader context of water management and conservation efforts becomes increasingly important.
Dam Height |
10 |
Surface Area |
15 |
Nid Storage |
96 |
Hazard Potential |
Undetermined |
Nid Height |
10 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Lynches River At Effingham
|
516cfs |
Pee Dee River Below Pee Dee
|
2860cfs |
Pee Dee River At Peedee
|
2890cfs |
Black Creek Near Quinby
|
261cfs |
Black River At Kingstree
|
1180cfs |
Little Pee Dee R. At Galivants Ferry
|
2190cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Matthews Pond Dam