Curtis Lake Reservoir Report

Last Updated: December 12, 2025

Curtis Lake, located in Putnam, Tennessee, is a private water resource primarily used for fire protection and as a stock or small fish pond.


°F

°F

mph

Wind

%

Humidity

Summary

This 4-acre lake has a normal storage capacity of 37 acre-feet and a maximum storage capacity of 45 acre-feet. The dam type is earth, with a structural height of 25 feet and a spillway type of uncontrolled.

Despite its low hazard potential, Curtis Lake has a moderate risk assessment rating of 3. The last inspection was conducted in June 2019, with an inspection frequency of 5 years. The condition assessment is currently not rated, and there is no emergency action plan prepared for the lake. The risk management measures and inundation maps status are also not specified in the data provided.

Overall, Curtis Lake serves as a vital resource for fire protection and recreational purposes in the region. With its modest size and low hazard potential, the lake provides a peaceful setting for fishing and wildlife habitat while also contributing to the local ecosystem. As climate and water resource enthusiasts, understanding and monitoring the condition and management of Curtis Lake can help ensure its continued sustainability and enjoyment for future generations.

Primary Dam Type

Earth

Surface Area

4

Nid Storage

45

Structural Height

25

Outlet Gates

None

Hazard Potential

Low

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.