Dam Report

Millers Creek Dam dam

Texas, USA Millers Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
75ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Millers Creek Dam -- None dam
Millers Creek Dam None · Millers Creek
About this dam

Millers Creek Dam

Millers Creek Dam, located in Baylor, Texas, is a crucial water supply structure managed by the local government. Constructed in 1974, this Earth-type dam stands at a height of 75 feet and has a storage capacity of 131,000 acre-feet. The dam serves the primary purpose of water supply for the region, with a normal storage capacity of 29,171 acre-feet and a surface area of 2,882 acres.

The dam spans a length of 9,250 feet and has an uncontrolled spillway with a width of 1,166 feet. It is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections to ensure its structural integrity. While the hazard potential and condition assessment are currently not available, the risk assessment has categorized the dam as having a moderate risk level.

Despite its age, Millers Creek Dam continues to play a vital role in providing water resources to the local community and stands as a testament to effective water management practices. With its impressive size and capacity, the dam remains a key asset in safeguarding against water scarcity and ensuring a reliable water supply for the region.

StateNone
River / streamMillers Creek
NID IDTX01029
Owner typeLocal Government
Primary purposeWater Supply
Dam typeEarth
Year built1974
Dam height75 ft
Dam length9,250 ft
Max storage131,000 AF
Normal storage29,171 AF
Surface area2,882.0 ac
Drainage area228.0 sq mi
Hazard potentialNot Available
ConditionNot Rated
Last inspectionWed, 13 Jan 2016 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Millers Creek Dam -- inflows here typically show up in storage 24-72 hours later.

Track Millers Creek Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Millers Creek Dam

Where does the data for Millers Creek Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.