Dam Report

Oak Creek Dam dam

Texas, USA Oak Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
87ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Oak Creek Dam -- None dam
Oak Creek Dam None · Oak Creek
About this dam

Oak Creek Dam

Located in Coke, Texas, Oak Creek Dam was designed by FREESE AND NICHOLS and completed in 1950 for the primary purpose of water supply. This earth dam stands at a height of 87 feet and has a structural height of 95 feet, with a length of 3800 feet. With a normal storage capacity of 39,360 acre-feet and a maximum storage capacity of 79,336 acre-feet, Oak Creek Dam serves as a vital water resource for the region.

The dam, situated on Oak Creek, is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular state inspections, enforcement, and permitting. Its spillway, an uncontrolled type with a width of 1100 feet, ensures the safe release of excess water. Despite being classified as having a fair condition assessment in 2014, Oak Creek Dam poses a moderate risk level, with a hazard potential that is not available. This structure is critical for maintaining water supply and managing the local climate in the area.

With its strategic location and significant storage capacity, Oak Creek Dam plays a crucial role in water management and climate control in Coke, Texas. As a primary source of water supply, this dam stands as a testament to effective engineering design and serves as a valuable resource for the region. Its state-regulated status and regular inspections demonstrate a commitment to ensuring the safety and reliability of this essential infrastructure for years to come.

StateNone
River / streamOak Creek
NID IDTX03516
Owner typeLocal Government
Primary purposeWater Supply
Dam typeEarth
Year built1950
Dam height87 ft
Dam length3,800 ft
Max storage79,336 AF
Normal storage39,360 AF
Surface area2,375.0 ac
Drainage area244.0 sq mi
Hazard potentialNot Available
ConditionFair
Last inspectionTue, 05 Nov 2013 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Oak Creek Dam -- inflows here typically show up in storage 24-72 hours later.

Track Oak Creek Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Oak Creek Dam

Where does the data for Oak Creek Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.