Teasdale Dam A Reservoir Report

Last Updated: December 5, 2025

Teasdale Dam A, located in Utah's Wayne County, is a private-owned structure regulated by the Utah Division of Water Rights.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1984 for irrigation purposes, this earth dam stands at a structural height of 25 feet and has a storage capacity of 40 acre-feet. Despite being not rated for its condition assessment, the dam presents a significant hazard potential and undergoes inspection every two years to ensure its safety and integrity.

Situated on Birch Creek in an offstream location, Teasdale Dam A plays a crucial role in facilitating irrigation activities in the region. With a drainage area of 12.5 square miles, this dam serves as a vital water resource for agricultural practices in the area. While it lacks specific spillway measurements and other technical details, the dam's construction and operational aspects are closely monitored by state regulatory agencies to prevent any potential risks or hazards.

The dam's association with the Los Angeles District of the US Army Corps of Engineers further highlights its importance in water management and conservation efforts. As water resource enthusiasts and climate advocates continue to monitor and assess the impact of dams like Teasdale Dam A on local ecosystems and communities, it is essential to recognize the critical role these structures play in sustaining water supplies for agricultural and environmental needs in the region.

Year Completed

1984

River Or Stream

BIRCH CREEK - OFFSTREAM

Primary Dam Type

Earth

Drainage Area

12.5

Nid Storage

40

Structural Height

25

Hazard Potential

Significant

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.