Aldersgate Lake Dam Reservoir Report

Last Updated: December 5, 2025

Aldersgate Lake Dam, located in Pulaski County, Arkansas, was completed in 1950 and serves as a recreational water resource for the local community.


°F

°F

mph

Wind

%

Humidity

Summary

The earth dam has a hydraulic height of 16 feet and a structural height of 21 feet, with a total length of 239 feet. The dam holds a maximum storage capacity of 63 acre-feet, with a normal storage level of 32 acre-feet.

Despite its low hazard potential, Aldersgate Lake Dam has not been rated for its condition assessment, and there is no information available on its emergency action plan or risk management measures. The dam is not state-regulated and does not fall under the jurisdiction of any state agency. Located on Brodie Creek-TR, the dam provides essential recreational opportunities while also serving as a vital water resource for the surrounding area. Water resource and climate enthusiasts can appreciate the significance of this structure in providing both leisure and practical benefits to the community.

Year Completed

1950

Dam Length

239

River Or Stream

BRODIE CREEK-TR

Primary Dam Type

Earth

Hydraulic Height

16

Nid Storage

63

Structural Height

21

Hazard Potential

Low

Nid Height

21
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.