Dam Report

Murray Lock And Dam dam

Arkansas, USA Arkansas Hazard Significant
Today high
--
Tonight low
--
Dam height
23ft
Hazard rating
Significant
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Murray Lock And Dam -- None dam
Murray Lock And Dam None · Arkansas
About this dam

Murray Lock And Dam

Murray Lock and Dam, also known as Pool 7, is a federal-owned structure located in Little Rock, Arkansas, along the Arkansas River. Completed in 1969, this concrete gravity dam serves multiple purposes including navigation, hydroelectric power generation, and recreation. With a height of 23 feet and a length of 3740 feet, the dam has a storage capacity of 108,500 acre-feet and a maximum discharge rate of 416,000 cubic feet per second.

The dam is equipped with a controlled spillway and a single lock that is 600 feet long and 110 feet wide. The risk assessment for Murray Lock and Dam indicates a very high risk level, with the U.S. Army Corps of Engineers (USACE) actively managing flood risks by monitoring and maintaining the dam's structural integrity. USACE also collaborates with local emergency managers to develop emergency action plans and ensure readiness in case of a dam-related emergency. Regular inspections and maintenance are carried out to mitigate risks and ensure the safety of the surrounding communities.

Overall, Murray Lock and Dam plays a crucial role in water resource management and flood control along the Arkansas River. As a key infrastructure managed by USACE, it underscores the importance of proactive risk management and emergency preparedness in safeguarding communities and infrastructure from potential hazards associated with dam operations.

StateNone
River / streamArkansas
NID IDAR00171
Owner typeFederal
Primary purposeNavigation
Dam typeConcrete
Year built1969
Dam height23 ft
Dam length3,740 ft
Max storage108,500 AF
Normal storage87,100 AF
Surface area9,700.0 ac
Drainage area158,030.0 sq mi
Hazard potentialSignificant
ConditionNot Available
Last inspectionThu, 28 Jun 2018 05:00:00 GMT
EAP preparedYes

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Murray Lock And Dam -- inflows here typically show up in storage 24-72 hours later.

Track Murray Lock And Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Murray Lock And Dam

Where does the data for Murray Lock And Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Significant hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Murray Lock And Dam.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
🔔

Manage alerts in the Snoflo app

Custom alerts are configured in the iOS app -- favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

Open App Store