Pitch Reservoir Dam Reservoir Report

Last Updated: December 5, 2025

Pitch Reservoir Dam, located in Morris, Connecticut, is a crucial water supply structure managed by the local government.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1944, this masonry dam stands at a height of 94 feet and has a storage capacity of 4200 acre-feet, serving the surrounding area with a normal storage of 3120 acre-feet. The dam is situated on Pitch Brook and covers a surface area of 110 acres, with a drainage area of 2.35 square miles.

With a high hazard potential, the Pitch Reservoir Dam is regularly inspected to ensure its structural integrity and safety. The most recent inspection in October 2020 deemed the dam's condition as satisfactory. The dam has a spillway width of 150 feet and a maximum discharge capacity of 15,795 cubic feet per second. The dam's emergency action plan is up-to-date, prepared to guide response and evacuation procedures in case of a potential breach.

Water resource and climate enthusiasts will find the Pitch Reservoir Dam an essential piece of infrastructure in the region, safeguarding water supply and managing flood risks. Its historical significance, coupled with its impressive specifications and safety measures, make it a noteworthy site for those interested in the intersection of water management and infrastructure resilience.

Year Completed

1944

Dam Length

920

Dam Height

94

River Or Stream

PITCH BROOK

Primary Dam Type

Masonry

Surface Area

110

Drainage Area

2.35

Nid Storage

4200

Hazard Potential

High

Nid Height

94
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.