Miles Pond Dam Reservoir Report

Last Updated: December 6, 2025

Miles Pond Dam, located in Sharon, Connecticut, was completed in 1920 and serves as a recreational water resource on Carse Brook.


°F

°F

mph

Wind

%

Humidity

Summary

Owned privately, the dam stands at 14 feet high and spans 300 feet in length, providing a storage capacity of 83 acre-feet. Despite its age, the dam is deemed to have a low hazard potential and its condition remains unrated as of now.

The dam is state-regulated by the Department of Energy and Environmental Protection (DEEP) and undergoes regular inspections, permitting, and enforcement protocols. Although there are no associated structures or outlet gates, the dam's primary purpose is for recreation, offering a surface area of 14.7 acres for water enthusiasts to enjoy. With a maximum discharge of 67 cubic feet per second, the dam contributes to the overall hydrology of the area and provides a serene environment for outdoor activities.

Ensuring the safety and functionality of Miles Pond Dam is paramount, with emergency action plans and risk management measures potentially in place. While the dam has not been assessed for condition or emergency preparedness recently, its historical significance and role in water resource management make it a valuable asset in the region. For water resource and climate enthusiasts, monitoring and maintaining the integrity of Miles Pond Dam is crucial for sustainable water use and environmental stewardship in the area.

Year Completed

1920

Dam Length

300

Dam Height

14

River Or Stream

CARSE BROOK

Primary Dam Type

Earth

Surface Area

14.7

Drainage Area

2.11

Nid Storage

83

Hazard Potential

Low

Nid Height

14
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.