Payne Creek Clar. Area No 2 Reservoir Report
Last Updated: January 11, 2026
Payne Creek Clarification Area No 2, located in Polk County, Florida, is a privately owned earth dam constructed in 1968 for the primary purpose of tailings storage.
°F
°F
mph
Wind
%
Humidity
Summary
This dam, standing at a height of 36 feet and stretching over 7390 feet in length, plays a crucial role in managing water resources in the area. With a storage capacity of 1730 acre-feet and a surface area of 48 acres, the dam serves to regulate the flow of water in Payne Creek, a vital tributary in the region.
Despite its low hazard potential, Payne Creek Clarification Area No 2 is regulated, permitted, inspected, and enforced by the state of Florida. This ensures that the dam is in compliance with safety standards and is well-maintained to prevent any potential risks or failures. While the dam's condition assessment is currently not rated, its emergency action plan status, risk assessment, and management measures are yet to be determined. As water resource and climate enthusiasts, understanding the role of dams like Payne Creek Clarification Area No 2 is crucial in managing and conserving our natural resources effectively.
Year Completed |
1968 |
Dam Length |
7390 |
Dam Height |
36 |
River Or Stream |
PAYNE CREEK |
Primary Dam Type |
Earth |
Surface Area |
48 |
Hydraulic Height |
36 |
Nid Storage |
1730 |
Structural Height |
31 |
Hazard Potential |
Low |
Nid Height |
36 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Payne Creek Settling Area No 1