Beaverdam Creek Ws Str # 17 Reservoir Report

Last Updated: December 5, 2025

Beaverdam Creek WS Str # 17, located in Hart, Georgia, is a state-regulated dam designed by the Natural Resources Conservation Service in 1968 for flood risk reduction along Clarks Creek.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a height of 38 feet and spans 475 feet, with a storage capacity of 1350 acre-feet. The dam's hazard potential is rated as high, with a fair condition assessment as of February 2013.

The dam's primary purpose is flood risk reduction, serving the Eagle Grove Community and surrounding areas. With a drainage area of 3175 acres and a surface area of 35 acres, Beaverdam Creek WS Str # 17 plays a crucial role in managing water flow and protecting downstream areas from potential flooding events. While the dam is currently in fair condition, regular inspections and maintenance are essential to ensure its continued effectiveness in mitigating flood risks in the region.

Local government and state agencies, including the GA-SAFE DAMS PROGRAM, are responsible for permitting, inspecting, and enforcing regulations related to Beaverdam Creek WS Str # 17. With a risk assessment rating of moderate and a designated emergency action plan, the dam is a vital infrastructure asset for water resource and climate enthusiasts interested in sustainable water management practices in Georgia's diverse landscapes.

Year Completed

1968

Dam Length

475

Dam Height

38

River Or Stream

CLARKS CREEK

Primary Dam Type

Earth

Surface Area

35

Drainage Area

3175

Nid Storage

1350

Outlet Gates

Uncontrolled

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

38
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.