Graham dam
Graham
Graham is a private irrigation dam located in Forest Grove, Oregon, on the banks of Dilley Creek. Built in 1961, this Earth-type dam stands at 33.5 feet tall and stretches 550 feet in length. It serves the primary purpose of irrigation, with a storage capacity of 180 acre-feet and a maximum storage of 220 acre-feet. The dam covers a surface area of 15.25 acres and has a drainage area of 0.57 square miles.
Managed by the Natural Resources Conservation Service, Graham has a low hazard potential and has not been rated for its condition assessment. Despite its age, the dam has undergone inspections every 6 years, with the last one conducted in November 2016. State-regulated and permitted, Graham is subject to regular inspections, enforcement, and oversight by the Oregon Water Resources Department. Situated in Washington County, Oregon, this dam plays a crucial role in supporting local agriculture through its irrigation capabilities.
With a hydraulic height of 28 feet and a NID height of 34 feet, Graham is a vital water resource structure in the region. Its presence helps ensure water availability for agricultural activities and contributes to the overall water management efforts in the area. As a privately owned dam, Graham stands as a testament to the collaboration between private landowners and state agencies in sustaining water resources for the benefit of the community.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Graham -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Tualatin River Near Dilley | 96 cfs | → |
| East Fork Dairy Creek Near Meacham Corner | 21 cfs | → |
| Willamette River At Newberg | 10,700 cfs | → |
| Fanno Creek At 56th Ave | 0 cfs | → |
| Fanno Creek At Durham | 8 cfs | → |
| South Yamhill River At Mcminnville | 233 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Graham.
Boat launches
- Crescent Park Greenway Hillsboro
- Sauvie Island Boat Ramp
- Cook Park
- Dayton Boat Ramp
- Happy Rock Moorage Inc.
- San Salvador Access
Campgrounds
- Camp R&R
- Gales Creek
- Gales Creek Campground
- Brooke Creek Hike-In Camp
- L. L. Stub Stewart State Park
- Reeher Forest Park
Track Graham in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Graham
Where does the data for Graham come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Graham.