Moore Lake Reservoir Report

Last Updated: December 5, 2025

Moore Lake, located in Asheville, North Carolina, is a private water resource regulated by the NC Department of Environmental Quality and the Dam Safety Program.


°F

°F

mph

Wind

%

Humidity

Summary

The lake serves primarily for recreational purposes and is situated along Long Creek with a structural height of 14.3 feet and a hydraulic height of 12.3 feet. The dam, with a length of 150 feet, has a normal storage capacity of 6 acre-feet and a maximum storage capacity of 8 acre-feet.

Despite being categorized as having a significant hazard potential, Moore Lake is currently in fair condition as of the last assessment in May 2017. Regular inspections are conducted every two years to ensure the safety and integrity of the dam structure. Although no modification or improvement projects have been reported, the lake remains a popular spot for water and climate enthusiasts seeking recreational activities in the Buncombe County area. With its picturesque location and ample surface area of 0.7 acres, Moore Lake continues to attract visitors looking to enjoy the outdoors in a serene environment.

Dam Length

150

River Or Stream

Long Creek

Primary Dam Type

Earth

Surface Area

0.7

Hydraulic Height

12.3

Nid Storage

8

Structural Height

14.3

Hazard Potential

Significant

Nid Height

14
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.