King Family Dam Reservoir Report

Last Updated: December 5, 2025

King Family Dam, located in Toledo, North Carolina, on Mine Fork Branch, is a private Earth dam primarily used for recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1969, this dam stands at a structural height of 25.5 feet and has a hydraulic height of 19.5 feet, with a length of 350 feet. Although it does not have a state regulatory agency overseeing it, the dam has been inspected and deemed to be in fair condition as of December 2012.

The dam has a significant hazard potential and a storage capacity of 10 acre-feet, with a maximum storage of 10 acre-feet. It is owned privately and not regulated by the state, with no state permitting or enforcement in place. The last inspection was conducted in December 2012, and it meets the guidelines for emergency action plans. The surrounding area offers a surface area of 1 acre for recreational activities, making it an ideal spot for water resource and climate enthusiasts to visit and enjoy the scenic beauty of the area.

Despite its private ownership, King Family Dam serves as a valuable recreational resource in Yancey County, North Carolina. With its picturesque location and ample storage capacity, the dam provides opportunities for outdoor activities and relaxation. While maintaining its fair condition, the dam continues to be a popular destination for locals and visitors alike, offering a tranquil escape in the heart of nature.

Year Completed

1969

Dam Length

350

River Or Stream

Mine Fork Branch

Primary Dam Type

Earth

Surface Area

1

Hydraulic Height

19.5

Nid Storage

10

Structural Height

25.5

Hazard Potential

Significant

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.