Magnolia Walk Dam Reservoir Report

Last Updated: December 5, 2025

Magnolia Walk Dam, located in Mecklenburg, North Carolina, is a recreational dam with a hydraulic height of 2 feet and a structural height of 11.5 feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, standing at a length of 250 feet, serves as a popular spot for outdoor enthusiasts seeking leisure activities in its 1.3-acre surface area. Despite its primary purpose being recreation, the dam poses a high hazard potential, although its condition assessment was deemed satisfactory during the last inspection in June 2020.

With a storage capacity of 11 acre-feet, Magnolia Walk Dam plays a crucial role in the area's water resource management, serving as a vital asset for the local community. While the dam is not state-regulated, it undergoes regular inspections to ensure its safety and functionality. The risk assessment and management measures for the dam are currently unspecified, highlighting the importance of continued monitoring and maintenance to mitigate potential hazards and ensure long-term sustainability.

Overall, Magnolia Walk Dam stands as a significant landmark in Mecklenburg, North Carolina, offering both recreational opportunities and water resource management benefits. As enthusiasts of water resources and climate, it is essential to recognize the dam's role in providing leisure activities while also acknowledging the need for ongoing monitoring and risk management to safeguard the surrounding community and environment from potential hazards.

Dam Length

250

Surface Area

1.3

Hydraulic Height

2

Drainage Area

24

Nid Storage

11

Structural Height

11.5

Hazard Potential

High

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.