Fern Ridge Dam - Dike 2 Reservoir Report

Last Updated: December 10, 2025

Fern Ridge Dam - Dike 2, located in Eugene, Oregon, is a Federal-owned structure managed by the US Army Corps of Engineers.


°F

°F

mph

Wind

%

Humidity

Summary

With a height of 14 feet and a storage capacity of 56,647 acre-feet, this dam plays a crucial role in managing water levels and mitigating flood risks in the region. The dam is associated with two other structures and is part of the Portland District of the USACE.

Despite its low hazard potential, the dam is subject to regular inspections and risk management measures to ensure its structural integrity and functionality. The USACE actively monitors the dam's condition, conducts necessary maintenance and repairs, and collaborates with local emergency managers to develop emergency action plans and evacuation procedures in case of a dam-related emergency. While the dam does not eliminate all flood risks, the USACE works diligently to address various risk factors associated with the dam and to keep the community informed and prepared for potential emergencies. More detailed information specific to Fern Ridge Dam - Dike 2 will be provided in the future to enhance risk management and emergency response efforts.

Dam Length

3750

Dam Height

14

Hydraulic Height

7

Nid Storage

56647

Structural Height

14

Hazard Potential

Low

Nid Height

14
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
View more

Area Campgrounds