Watson East Dam Reservoir Report

Last Updated: December 5, 2025

Watson East Dam, located in Walker County, Texas, was completed in 1960 and serves as a vital water resource for the area.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam, standing at a height of 19 feet and a length of 1488 feet, has a storage capacity of 165 acre-feet, providing essential water for irrigation and other purposes. Although it does not have a spillway, the dam's structural integrity and functionality have been confirmed through state inspections.

The dam, situated on the TR-PHELPS CREEK, is primarily constructed of earth with a buttress core type. While it does not have a designated hazard potential or condition rating, it is noted to have a high risk assessment due to its age and lack of recent evaluations. Despite this, the dam has not been subject to state regulation or enforcement, although it does require regular inspections and permitting. The surrounding community, including climate and water resource enthusiasts, relies on Watson East Dam for sustainable water management and conservation efforts.

Year Completed

1960

Dam Length

1488

Dam Height

19

River Or Stream

TR-PHELPS CREEK

Primary Dam Type

Earth

Surface Area

18

Hydraulic Height

19

Nid Storage

165

Structural Height

19

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

19
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.