Morris Dam Reservoir Report

Last Updated: December 5, 2025

Morris Dam, located in Comanche, Texas, was completed in 1973 with a primary purpose of irrigation.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam stands at a height of 13 feet and has a length of 1580 feet, providing a storage capacity of 80 acre-feet. The dam is situated on the TR-Sabana River, managed by the Fort Worth District of the US Army Corps of Engineers.

Despite being a private structure, Morris Dam is subject to state permitting and inspection requirements. With no spillway and limited information on its hazard potential and condition assessment, the dam poses a high risk, according to available data. The dam is not regulated by the state and does not have an Emergency Action Plan in place, highlighting potential safety concerns in case of emergencies.

For water resource and climate enthusiasts, Morris Dam presents an intriguing case study of a privately owned irrigation structure in Texas. The limited information available on its risk assessment and emergency preparedness emphasizes the importance of thorough monitoring and regulation of such critical infrastructure to ensure the safety and sustainability of water resources in the region.

Year Completed

1973

Dam Length

1580

Dam Height

13

River Or Stream

TR-SABANA RIVER

Primary Dam Type

Earth

Hydraulic Height

13

Nid Storage

80

Structural Height

13

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

13
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.