Spinella Dam Reservoir Report

Last Updated: December 7, 2025

Located in Floyd, Virginia, Spinella Dam stands at a height of 27.5 feet and has a maximum storage capacity of 38.61 acre-feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, with a length of 220 feet, serves various purposes and is regulated by the Department of Conservation and Recreation. Despite its undetermined hazard potential and lack of a condition assessment rating, Spinella Dam is subject to regular state inspections to ensure its safety and compliance with regulatory standards.

Situated within Congressional District 09, Virginia, Spinella Dam plays a crucial role in water resource management in the region. The dam's primary purpose, along with its normal storage capacity of 33.6 acre-feet, contributes to the conservation and regulation of water flow in the area. While specific details regarding its construction year and spillway type are not provided, the dam's presence signifies a significant infrastructure for flood control and water supply management.

As a key feature in the Wilmington District, Spinella Dam is integral to the overall water resource infrastructure of Virginia. With its strategic location and state-regulated status, the dam serves as a vital component in the management of surface water resources in the region. Its importance in ensuring water availability, flood control, and environmental sustainability makes Spinella Dam a critical asset for water resource and climate enthusiasts to monitor and explore further.

Dam Length

220

Dam Height

27.5

Surface Area

3.5

Hydraulic Height

27.5

Nid Storage

38.61

Structural Height

27.5

Hazard Potential

Undetermined

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.