Tate Dam Reservoir Report
Nearby: Collie Dam Rol Dam
Last Updated: December 6, 2025
Tate Dam, located in Pittsylvania, Virginia, is a private-owned structure primarily used for recreation.
°F
°F
mph
Wind
%
Humidity
Summary
Standing at a height of 26 feet with a length of 240 feet, the dam offers a maximum storage capacity of 25 acre-feet and a normal storage capacity of 17 acre-feet. Situated on a tributary of Branch Creek, this earth-type dam provides a surface area of 1.8 acres for recreational activities such as fishing and boating.
Managed by the Department of Conservation and Recreation, Tate Dam is regulated and inspected by the state of Virginia to ensure its safety and compliance with regulatory standards. Although its hazard potential is currently classified as undetermined and its condition assessment is not yet rated, the dam's emergency action plan readiness and risk management measures are not specified in the data. With its picturesque location and potential for outdoor enjoyment, Tate Dam serves as a key water resource for both locals and visitors seeking a tranquil environment for leisure activities.
For water resource and climate enthusiasts, Tate Dam presents an intriguing case study in the realm of recreational dam management. As a privately-owned structure with state jurisdiction and regulatory oversight, the dam's design, construction, and operational aspects offer valuable insights into the intersection of water management, environmental conservation, and public safety. With its detailed attributes and location specifics, Tate Dam stands as a significant landmark in the water resource landscape of Virginia, inviting further exploration and analysis for those passionate about sustainable water use and climate resilience.
Dam Length |
240 |
Dam Height |
26 |
River Or Stream |
Trib to Branch Creek |
Primary Dam Type |
Earth |
Surface Area |
1.8 |
Hydraulic Height |
26 |
Nid Storage |
25 |
Structural Height |
26 |
Hazard Potential |
Undetermined |
Nid Height |
26 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dan River At Stp Near Danville
|
979cfs |
Dan River At Paces
|
1160cfs |
Sandy River Near Danville
|
38cfs |
Hyco R Bl Abay D Nr Mcgehees Mill
|
1cfs |
Banister River At Halifax
|
180cfs |
Dan River At South Boston
|
1070cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Tate Dam