Sandy Creek Ws Structure # 18 Reservoir Report

Last Updated: December 5, 2025

Sandy Creek WS Structure # 18, located in Commerce Community, Georgia, is a state-owned earth dam constructed in 1962 by the Natural Resources Conservation Service.


°F

°F

mph

Wind

%

Humidity

Summary

With a height of 33 feet and a length of 855 feet, this dam serves as a flood risk reduction measure for the area. The dam has a storage capacity of 418 acre-feet and primarily regulates the flow of an unknown river or stream.

Despite being uncontrolled, the spillway of Sandy Creek WS Structure # 18 has a low hazard potential and is categorized as having a moderate risk level. The dam's condition assessment is currently not rated, with the last inspection conducted in August 2016. Although the dam is not regularly permitted or regulated by the state, it is subject to state inspection to ensure its structural integrity and safety.

Overall, Sandy Creek WS Structure # 18 plays a crucial role in managing flood risk in the region and maintains a moderate risk level. As a significant water resource infrastructure in Jackson County, Georgia, the dam requires periodic inspections to assess its condition and ensure public safety. Its construction by the Natural Resources Conservation Service highlights the collaborative efforts between local and state government agencies to protect communities from potential flooding events.

Year Completed

1962

Dam Length

855

Dam Height

33

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

9

Hydraulic Height

32

Drainage Area

876

Nid Storage

418

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

33
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.