Morey Pond Dam Reservoir Report

Last Updated: December 19, 2025

Morey Pond Dam, located in Andover, New Hampshire, is a state-regulated concrete dam primarily used for recreation on Mountain Brook.


°F

°F

mph

Wind

%

Humidity

Summary

Standing at a height of 12 feet, the dam has a storage capacity of 98 acre-feet and a normal storage level of 29.5 feet. With a surface area of 6.9 acres and a drainage area of 1 square mile, the dam's spillway type is uncontrolled with a width of 8 feet. Despite being classified as having a low hazard potential, the dam is rated in fair condition and undergoes inspections every 6 years.

Owned by the state and managed by the NHDES Dam Bureau, Morey Pond Dam has a moderate risk rating but meets regulatory guidelines for emergency action plans. The dam's hazard potential is considered low, but risk management measures have not been specified. While the dam's condition is fair, with no recent updates on its assessment date, it remains an important site for recreational activities in the area. With its unique design and purpose, Morey Pond Dam serves as a vital water resource for the community while also providing a picturesque backdrop for outdoor enthusiasts in Merrimack County, New Hampshire.

Dam Length

35

Dam Height

12

River Or Stream

MOUNTAIN BROOK

Primary Dam Type

Concrete

Surface Area

6.9

Drainage Area

1

Nid Storage

98

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.