Scs-Roaring Creek Site-D6 Reservoir Report
Last Updated: December 6, 2025
SCS-Roaring Creek Site-D6, located in Grady County, Oklahoma, is a state-regulated earth dam designed by USDA NRCS and completed in 1966 for flood risk reduction on the TR-DRY CREEK.
°F
°F
mph
Wind
%
Humidity
Summary
The dam stands at a height of 27 feet and has a length of 750 feet, with a storage capacity of 180 acre-feet. The spillway type is controlled with a width of 1 foot, and the dam features a valve outlet gate.
Despite being classified as low hazard potential, the dam is considered to have a very high risk level, emphasizing the importance of regular inspections and maintenance. The last inspection conducted was in 1980, with an inspection frequency of 5 years. The condition of the dam is currently not rated, and there are no emergency action plans or inundation maps prepared for the site. Overall, SCS-Roaring Creek Site-D6 serves as a crucial infrastructure for flood risk management in the region, highlighting the intersection of water resource management and climate resilience.
Year Completed |
1966 |
Dam Length |
750 |
Dam Height |
27 |
River Or Stream |
TR-DRY CREEK |
Primary Dam Type |
Earth |
Surface Area |
8 |
Hydraulic Height |
27 |
Nid Storage |
180 |
Structural Height |
27 |
Outlet Gates |
Valve - 1 |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
27 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Scs-Roaring Creek Site-D6