Meadow Park Lake Reservoir Report

Last Updated: December 6, 2025

Meadow Park Lake, located in Cumberland, Tennessee, is a scenic reservoir built in 1938 primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

With a storage capacity of 6,021 acre-feet, this concrete dam stands at a structural height of 37 feet, impounding water from Meadow Creek. Managed by the Tennessee Safe Dams Program, the dam is subject to state regulation, inspection, and enforcement to ensure public safety.

The reservoir, covering a surface area of 267 acres and serving as a popular spot for outdoor activities, poses a significant hazard potential due to its size and structural characteristics. However, recent assessments have deemed the dam's condition as satisfactory, with a moderate risk rating. The emergency action plan status and risk management measures for Meadow Park Lake remain unspecified, warranting further attention and preparation in case of potential emergencies.

Despite the dam's age and risk level, Meadow Park Lake continues to provide a picturesque setting for visitors to enjoy nature and engage in recreational pursuits. As climate change impacts water resources and weather patterns, ongoing monitoring and maintenance efforts are essential to ensure the safety and sustainability of this beloved local landmark in Todd, Tennessee.

Year Completed

1938

Dam Length

305

River Or Stream

MEADOW CREEK

Primary Dam Type

Concrete

Surface Area

267

Hydraulic Height

27.9

Drainage Area

5.18

Nid Storage

6021

Structural Height

37

Outlet Gates

None

Hazard Potential

Significant

Nid Height

37
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.