Dam Report

Whitehouse Dam dam

Texas, USA Prairie Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
50ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Whitehouse Dam -- None dam
Whitehouse Dam None · Prairie Creek
About this dam

Whitehouse Dam

Whitehouse Dam, located in Smith County, Texas, was completed in 1949 and serves as a critical water supply infrastructure for the region. The dam stands at a height of 50 feet and has a storage capacity of 85,810 acre-feet, with a normal storage level of 42,500 acre-feet. It spans 4,709 feet in length and is primarily made of earth and stone materials, with a spillway width of 200 feet for uncontrolled water release.

Managed by the Texas Commission on Environmental Quality (TCEQ), Whitehouse Dam plays a vital role in regulating the flow of Prairie Creek and supporting water resource management in the area. With a fair condition assessment as of 2016, the dam is inspected regularly to ensure its structural integrity and operational efficiency. Despite its moderate risk assessment level, the dam remains a crucial asset for water supply and climate resilience in the community, supported by local government ownership.

Furthermore, Whitehouse Dam has been designed by T.C. Forrest Jr. and Wisenbaker Fix & Associates, signifying a commitment to engineering excellence and sustainable water infrastructure development. As a key component of the Fort Worth District's water management system, the dam stands as a testament to the importance of maintaining and enhancing water resources in the face of changing climate patterns and environmental challenges. Its role in ensuring water security and supply reliability underscores the significance of responsible dam management for the benefit of both present and future generations.

StateNone
River / streamPrairie Creek
NID IDTX00245
Owner typeLocal Government
Primary purposeWater Supply
Dam typeEarth
Year built1949
Dam height50 ft
Dam length4,709 ft
Max storage85,810 AF
Normal storage42,500 AF
Surface area3,584.0 ac
Drainage area45.0 sq mi
Hazard potentialNot Available
ConditionFair
Last inspectionWed, 27 Jul 2016 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Whitehouse Dam -- inflows here typically show up in storage 24-72 hours later.

Track Whitehouse Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Whitehouse Dam

Where does the data for Whitehouse Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.