Bryan Dam Reservoir Report

Last Updated: December 6, 2025

Bryan Dam, located in Bedford, Virginia, is a state-regulated structure under the jurisdiction of the Department of Conservation and Recreation.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a height of 30 feet, with a hydraulic and structural height matching that measurement. With a storage capacity of 88.32 acre-feet, it serves as a vital water resource for the area, providing a normal storage of 51.6 acre-feet and covering a surface area of 5.38 acres.

Despite its importance, the condition assessment of Bryan Dam remains unrated, with an undetermined hazard potential. The dam has undergone one inspection so far, with an undetermined inspection frequency. However, the Emergency Action Plan (EAP) status and risk assessment for the dam are unknown, raising concerns about its safety and management in case of emergencies. With its location in a region susceptible to climate change impacts, the need for regular assessments and updated emergency preparedness measures for Bryan Dam is crucial to ensure the safety of surrounding communities and the integrity of the structure.

Dam Height

30

Surface Area

5.38

Hydraulic Height

30

Nid Storage

88.32

Structural Height

30

Hazard Potential

Undetermined

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.