Va Tech Dam Reservoir Report

Last Updated: December 5, 2025

Va Tech Dam, also known as 187dd029, is a privately owned structure located in Warren, Virginia.


°F

°F

mph

Wind

%

Humidity

Summary

The dam is regulated by the Department of Conservation and Recreation in Virginia, with state permitting, inspection, and enforcement in place. Standing at a height of 31.5 feet, with a hydraulic height matching its structural height, the dam has a storage capacity of 32.89 acre-feet and a normal storage level of 21 acre-feet.

While the hazard potential of Va Tech Dam is classified as undetermined and its condition assessment is currently not rated, the dam is subject to regular inspections with a frequency of one inspection per year. Emergency action plans, risk assessment, and management measures for the dam are yet to be documented and updated. The structure does not fall under the jurisdiction of the US Army Corps of Engineers, indicating that oversight and management primarily lie with state agencies.

Water resource and climate enthusiasts may find Va Tech Dam an interesting case study due to its private ownership, state regulation, and modest storage capacity. The dam's location in Virginia, its connection to the Norfolk District for certain purposes, and the lack of specific information on its design, purpose, or modifications could provide avenues for further research and exploration in the realm of water resource management and dam safety.

Dam Height

31.5

Surface Area

2.1

Hydraulic Height

31.5

Nid Storage

32.89

Structural Height

31.5

Hazard Potential

Undetermined

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.