Hills Lake Dam Reservoir Report

Last Updated: December 5, 2025

Hills Lake Dam, located in White, Georgia, was completed in 1973 with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

This Earth-type dam, designed by SCS, stands at a height of 33 feet with a hydraulic height of 22 feet and a length of 320 feet. The dam has a storage capacity of 33 acre-feet and a surface area of 3 acres, serving as a popular spot for outdoor activities in the MT VIEW CHURCH ENVIRONS.

Despite being privately owned, the dam is not regulated by the state but undergoes regular inspections, with the last one conducted in February 2011. Classified as having a low hazard potential, the dam's condition is currently not rated. The risk assessment for Hills Lake Dam is moderate, indicating a need for ongoing monitoring and maintenance to ensure the safety and functionality of the structure for both recreational use and potential water resource management in the area.

Year Completed

1973

Dam Length

320

Dam Height

33

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

3

Hydraulic Height

22

Nid Storage

33

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

33
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.