Kanati Lake Dam Reservoir Report

Last Updated: December 5, 2025

Kanati Lake Dam, located in White, Georgia, is a private structure primarily designed for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, built by SCS, is an earth dam with a buttress core type and stands at a height of 24 feet, with a hydraulic height of 22 feet. It has a storage capacity of 53 acre-feet, with a normal storage level of 45 acre-feet, covering a surface area of 5 acres.

Despite being unregulated by the state and having a low hazard potential, the dam poses a moderate risk due to its condition assessment being marked as "Not Rated." The last inspection was conducted in February 2011, and the dam has not been modified or updated in recent years. With an uncontrolled spillway and outlet gates, the dam's risk management measures and emergency preparedness are currently unknown, raising concerns for potential future impacts on the surrounding environment and community.

For water resource and climate enthusiasts, monitoring the condition and management of Kanati Lake Dam is crucial to ensure the safety of its recreational use and the preservation of its surroundings. With its location in a picturesque setting in Cleveland, Georgia, it serves as both a recreational spot and a potential risk factor that demands attention and proactive measures to mitigate any potential hazards.

Dam Length

175

Dam Height

24

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

5

Hydraulic Height

22

Nid Storage

53

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.