Mountain Lake Dam Reservoir Report

Last Updated: December 5, 2025

Mountain Lake Dam, located in Cleveland, Georgia, is a private earth dam primarily used for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Standing at a height of 33 feet with a hydraulic height of 28 feet, the dam creates a storage capacity of 78 acre-feet and covers a surface area of 6 acres. The dam, constructed by designer ALLEN, has a spillway type of uncontrolled and an outlet gate that is also uncontrolled, with a low hazard potential and a moderate risk assessment.

Despite being a private structure, Mountain Lake Dam falls under state jurisdiction and is subject to regular inspections, with the last inspection taking place in March 2003. The dam has not been rated for its condition, and there is no emergency action plan in place. While the risk of the dam is considered moderate, there are no specific risk management measures or guidelines in place. Overall, Mountain Lake Dam presents an interesting case study for water resource and climate enthusiasts, showcasing the importance of maintaining and managing dams for both recreational and safety purposes in the face of changing environmental conditions.

Dam Length

180

Dam Height

33

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

6

Hydraulic Height

28

Nid Storage

78

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

33
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.