Walker (Bryan Creek) Reservoir Report

Last Updated: December 13, 2025

Walker (Bryan Creek) is a privately owned irrigation dam located in Newberg, Oregon.


°F

°F

mph

Wind

%

Humidity

Summary

Constructed in 1956, this earth dam stands at 35 feet tall and has a storage capacity of 209 acre-feet, serving the primary purpose of providing water for irrigation. Situated on Bryan Creek in Yamhill County, this dam plays a crucial role in supporting agricultural activities in the region.

With a significant hazard potential, Walker (Bryan Creek) is regulated by the state of Oregon, with inspections conducted regularly to ensure its structural integrity. The dam has a drainage area of 1.5 square miles and a maximum discharge capacity of 598 cubic feet per second. Despite being categorized as "Not Rated" in terms of condition assessment, the dam remains a vital resource for water management in the area.

Managed by private owners, Walker (Bryan Creek) highlights the importance of sustainable water resource management in the face of climate change. As water resources become increasingly scarce, the proper maintenance and regulation of dams like Walker are essential for ensuring a reliable water supply for agricultural and environmental needs in the region.

Year Completed

1956

Dam Length

850

Dam Height

35

River Or Stream

BRYAN CREEK

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

25

Drainage Area

1.5

Nid Storage

209

Structural Height

32

Hazard Potential

Significant

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.