Duke Lake Dam Reservoir Report

Last Updated: December 6, 2025

Duke Lake Dam, located in Romayor, Texas, was completed in 1955 and serves as an essential irrigation structure in the area.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam, standing at a height of 17 feet and stretching 1500 feet in length, has a storage capacity of 648 acre-feet and covers a surface area of 72 acres. The primary purpose of Duke Lake Dam is for irrigation, with additional uses including fire protection, stock watering, and small fish pond management.

Managed by the Texas Commission on Environmental Quality (TCEQ), Duke Lake Dam has been designated as state-regulated, with inspection, permitting, and enforcement procedures in place. Despite its age, the dam's condition has not been officially rated, and the hazard potential is currently labeled as "Not Available." The risk assessment for Duke Lake Dam is considered high, indicating the importance of ongoing monitoring and maintenance to ensure the safety and integrity of the structure for the surrounding community and water resources.

In the event of an emergency, details related to the Emergency Action Plan (EAP) and risk management measures for Duke Lake Dam are not readily available. However, with its vital role in irrigation and water management for the area, continued attention to the dam's condition and risk assessment is crucial for safeguarding the community and the environment. As a significant structure along TR-Menard Creek, Duke Lake Dam stands as a testament to the importance of sustainable water resource management in the face of changing climate conditions.

Year Completed

1955

Dam Length

1500

Dam Height

17

River Or Stream

TR-MENARD CREEK

Primary Dam Type

Earth

Surface Area

72

Hydraulic Height

17

Nid Storage

648

Structural Height

17

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

17
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.