Haralson Lake Dam Reservoir Report

Last Updated: December 5, 2025

Haralson Lake Dam, located in Trinity, Texas, was completed in 1957 and serves multiple purposes including fire protection and as a stock or small fish pond.


°F

°F

mph

Wind

%

Humidity

Summary

The earth dam, with a height of 16 feet and a length of 700 feet, stands on the TR-Village Creek. It has a storage capacity of 130 acre-feet, with a normal storage level of 68 acre-feet, covering a surface area of 13 acres.

Despite being privately owned, the dam is regulated by the state with permitting and inspection requirements being met. The dam does not have a spillway and is classified as having a high risk potential. However, its condition assessment is not rated and no Emergency Action Plan (EAP) has been prepared, raising concerns about the dam's safety in case of emergencies. The last inspection was conducted in 1991, indicating a need for updated assessments and risk management measures to ensure the dam's structural integrity and the safety of the surrounding area.

Year Completed

1957

Dam Length

700

Dam Height

16

River Or Stream

TR-VILLAGE CREEK

Primary Dam Type

Earth

Surface Area

13

Hydraulic Height

16

Nid Storage

130

Structural Height

16

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.