Franklin Reservoir Report

Last Updated: December 23, 2025

Franklin, also known as Craven Creek, is a privately owned irrigation dam located in Lincoln, Wyoming.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1911, this Earth type dam stands at a height of 12 feet and has a length of 246 feet. It serves the primary purpose of irrigation, with a storage capacity of 244 acre-feet and a normal storage of 183 acre-feet.

Despite its age, Franklin has been deemed to have a low hazard potential but a poor condition assessment, last inspected in September 2018. The dam features an uncontrolled spillway and a single valve outlet gate. With a moderate risk assessment rating, Franklin is under state regulation and permitting, with regular inspections and enforcement to ensure its safety and compliance with regulations. Climate and water resource enthusiasts will find Franklin to be an intriguing structure to study in the context of Wyoming's water management infrastructure.

Year Completed

1911

Dam Length

246

Dam Height

12

River Or Stream

CRAVEN CREEK

Primary Dam Type

Earth

Surface Area

31

Hydraulic Height

10

Nid Storage

244

Structural Height

12

Outlet Gates

Valve - 1

Hazard Potential

Low

Foundations

Soil

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.