Lake Arthur Dam Reservoir Report

Last Updated: December 5, 2025

Lake Arthur Dam, located in Lumpkin, Georgia, is a privately owned structure primarily used for recreation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, completed in 1960, stands at a height of 32 feet and spans a length of 285 feet, with a storage capacity of 94 acre-feet. It is classified as an Earth dam with a Buttress core type and an uncontrolled spillway. The dam's hazard potential is rated as low, and its overall condition is currently not rated.

Despite not being regulated by the state, Lake Arthur Dam undergoes regular inspections to ensure its structural integrity. The dam, designed by SCS, is situated within the Philipi Church Environs, offering a serene environment for water resource and climate enthusiasts to enjoy recreational activities. With a moderate risk assessment score of 3, the dam is considered to have moderate risk management measures in place. Overall, Lake Arthur Dam serves as a vital component in the local water resource infrastructure while providing a safe and enjoyable recreational space for visitors.

Year Completed

1960

Dam Length

285

Dam Height

32

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

6

Drainage Area

330

Nid Storage

94

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.