Lone Pine dam
Lone Pine
Lone Pine, located in Larimer County, Colorado, is a privately owned dam on Lone Pine Creek with a primary purpose of recreation. Built in 1979, this earth dam stands at 39 feet high with a hydraulic height of 34 feet and a structural height of 48 feet. The dam has a storage capacity of 146 acre-feet and a surface area of 9 acres, serving the community for fish and wildlife pond activities as well as recreational opportunities.
With a low hazard potential and a satisfactory condition assessment, Lone Pine offers a safe environment for visitors to enjoy the surrounding natural beauty. The dam features an uncontrolled spillway with a width of 50 feet and a maximum discharge capacity of 1716 cubic feet per second. The inspection frequency for Lone Pine is every 6 years, with the last assessment conducted in August 2018.
Managed by the Colorado Department of Water Resources, Lone Pine is a vital structure for water resource management in the area. Its location in Fort Collins, along with its moderate risk assessment rating, highlights the importance of monitoring and maintaining this dam to ensure the safety and well-being of the community and the environment.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Lone Pine -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Sand Creek At Colorado-Wyoming State Line | 3 cfs | → |
| Laramie River Near Glendevey | 30 cfs | → |
| N Frk Cache La Poudre R Blw Halligan Res Nr V Dal | 81 cfs | → |
| North Fork Cache La Poudre R. At Livermore | 2 cfs | → |
| Joe Wright Creek Below Joe Wright Reservoir | 57 cfs | → |
| Cache La Poudre R A Mo Of Cn | 304 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Lone Pine.
Boat launches
See all →
Campgrounds
See all →
Fishing spots
See all →
River runs
See all →
About Lone Pine
Where does the data for Lone Pine come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card below for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.