Harris Branch Slurry Dam Reservoir Report
Nearby: Sediment Dam Lick Branch Refuse Dam
Last Updated: December 5, 2025
Harris Branch Slurry Dam, also known as Harris Branch Dam #4, is a private earth dam located in Lost Creek, Perry County, Kentucky.
°F
°F
mph
Wind
%
Humidity
Summary
The dam stands at a height of 150 feet and spans a length of 2350 feet, with a primary purpose of water supply. The dam has a high hazard potential and is regulated by the Mine Safety and Health Administration, with no state jurisdiction or permitting required.
Despite its impressive structure, details on the completion year, storage volume, and condition assessment of the dam are currently not available. However, it is essential to note that the dam poses a significant risk due to its high hazard potential. This information highlights the importance of regular inspections, emergency action plans, and risk management measures to ensure the safety of the surrounding community and water resources.
Water resource and climate enthusiasts interested in Harris Branch Slurry Dam can appreciate the unique challenges and responsibilities associated with maintaining a high-hazard dam in rural Kentucky. The dam's location, design, and purpose reflect the intricate balance between water supply needs and potential environmental risks, making it a fascinating subject for further exploration and study in the realm of water resource management and dam safety.
Dam Length |
2350 |
Dam Height |
150 |
Primary Dam Type |
Earth |
Nid Storage |
20 |
Hazard Potential |
High |
Nid Height |
150 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Harris Branch Slurry Dam