Middle Fork Willamette River Near Dexter flow report

Oregon, USA USGS #14150000 ↗

As of July 15, 2026, Middle Fork Willamette River Near Dexter is flowing at 1,710 cfs with a gage height of 3.16 ft, rising 8% over the past 24 hours. Source: USGS gauge #14150000, refreshed throughout the day.

Stale data This gauge hasn’t reported in days (last reading unknown). The readings below may not reflect current conditions.
Today high
--
Tonight low
--
Streamflow
--
Gage height
--
Loading current conditions…
Next 24 hours
Loading next 24 hours…
Right now · latest observation
Middle Fork Willamette River Near Dexter
USGS gauge #14150000
1,710 cfs streamflow
Latest reading from this gauge.
Gage height
3.16ft
Water temp
--
% of median
Since yesterday
↑ 8%
Loading streamflow history…
Conditions summary

Middle Fork Willamette River Near Dexter at a glance

How Middle Fork Willamette River Near Dexter is running right now, where it sits on the map, and the key gauge stats.

Middle Fork Willamette River Near Dexter is flowing at 1,710 cfs, with the water sitting 3.16 ft at the gage. Flow is up 8% since yesterday — a rising hydrograph.

This is USGS gauge #14150000 in Oregon. Over the past 10 days the average has been 1,671 cfs, peaking at 1,710 cfs.

For real-time updates and historical context, see the realtime view or the historical comparison. Browse other gauges in the Oregon flow report.

Middle Fork Willamette River Near Dexter on the map Open map →
Site IDUSGS 14150000
Last updated2026-07-15
Gage height, ft3.16 ft
Temperature, water, °C15.3 deg C
Streamflow, ft³/s1710.0 ft3/s
Dissolved oxygen, water, unfiltered, mg/L8.9 mg/l
Turbidity, water, unfiltered, monochrome near infra-red LED light, 780-900 nm, detection angle 90 ±2.5°, formazin nephelometric units (FNU)7.1 FNU
Total partial pressure of dissolved gases, water, unfiltered, percent of saturation100.0 %
Barometric pressure, mmHg748.0 mm/Hg
Total partial pressure of dissolved gases, water, unfiltered, mmHg746.0 mm/Hg
Max recorded14,400 cfs
Engineering & permitting

Engineering Data

Flow-duration statistics and observed peak-flow context computed from this gauge’s complete daily record (USGS #14150000).

P10 exceedanceexceeded 10% of days
P25 exceedanceexceeded 25% of days
P50 (median)exceeded half of days
P75 exceedanceexceeded 75% of days
P90 exceedanceexceeded 90% of days
Period of recorddaily observations
Conditions report:

Percentiles are flow-duration values computed from this gauge’s observed daily record as archived by Snoflo. Return periods are Weibull plotting-position estimates from observed annual maxima, provided as general reference context only. Always verify against official USGS NWIS records. Part of Snoflo for Engineering.

Streamflow outlook

Streamflow Forecast

Over the next 5 days, Middle Fork Willamette River Near Dexter is expected to hold near today's 1710 cfs, toward roughly 1692 cfs by 2026-07-20 (likely range 1427-2007 cfs) -- running well below the seasonal normal.

Powered by PULSE — Snoflo’s forecast engine, trained on this gauge’s full record of storms, snowmelt, and dry spells.

Loading flow outlook…
Daily forecast table
DateExpected (p50)Likely range (p25–p75)vs normalProjected stage
Work-window check: flow below cfs
Historical context

How does this compare to past years?

Year-over-year overlay, annual peak discharge, the full distribution of daily flows on record, and the gauge's rating curve.

Detailed forecast

Weather Forecast

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day forecast

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
About this location

Middle Fork Willamette River Near Dexter

The primary constituents of the river are precipitation and snowmelt from the surrounding mountains. The river has several tributaries, including the Lost Creek and Whiskey Creek. There are no major dams on the river, although some small ones exist to divert water for irrigation. The river experiences higher flows in the spring due to snowmelt and lower flows in the summer and fall. One interesting fact is that the Middle Fork Willamette River is a popular spot for fishing, particularly for rainbow trout.

Regional streamflow

Nearby streamflow levels

Cross-check Middle Fork Willamette River Near Dexter's discharge against nearby gauges to spot whether the change here is local or regional.

Regional snowpack

Nearby snowpack data

Snowpack at SNOTEL stations near Middle Fork Willamette River Near Dexter. Spring snowmelt is the dominant driver of streamflow in mountain basins -- a deep snowpack upstream means more runoff later in the season.

Nearby recreation

Plan a trip

Reservoirs, boat launches, river runs, and fishing spots within driving distance of Middle Fork Willamette River Near Dexter.

River levels & flood safety

Read the level before you go
A river that's runnable at one flow can be deadly at another. Check current discharge and gage height — like the values shown above — against the flood-stage thresholds, and remember levels can spike fast after rain or a dam release.
Respect cold water
Snowmelt rivers run cold even in summer. Sudden immersion triggers cold-water shock and saps strength within minutes. Wear a PFD, dress for the water temperature (not the air), and never wade or paddle alone.
Watch for swiftwater hazards
Strainers (downed trees), undercut rocks, and low-head dams are the deadliest features on moving water. High, fast, muddy water hides them. If in doubt, scout from shore and portage.
Mind flash floods & releases
Narrow canyons can flood from a storm miles upstream, and dam-controlled reaches can rise without warning. Know the forecast, the release schedule, and your exit before you launch.

Track Middle Fork Willamette River Near Dexter in the Snoflo app

Save this gauge as a favorite, set push alerts when streamflow crosses a threshold (e.g. "alert me when Middle Fork Willamette River Near Dexter crosses 5,000 cfs"), and Snoflo's iOS app will push the moment USGS reports the crossing.

FAQ

About Middle Fork Willamette River Near Dexter

Where does the streamflow data for Middle Fork Willamette River Near Dexter come from?

Discharge, gage height, and water temperature come directly from the USGS streamflow gauge 14150000. Snoflo refreshes the time series throughout the day. Forecasts come from the NOAA / yr.no feed Snoflo's iOS app uses.

How often is the report updated?

USGS gauges report continuously (typically every 15 minutes). Snoflo pulls fresh values throughout the day — look for the "as of" timestamp on the streamflow hero card.

What's the difference between discharge and gage height?

Discharge (cubic feet per second, or cfs) is the volume of water flowing past the gauge each second. Gage height is how high the water sits at the gauge (feet). They're related by a rating curve specific to each gauge — higher water means more flow, but the exact ratio depends on channel shape.

How is "percent of median" calculated?

Today's discharge is compared to the historical median discharge on this calendar day across the gauge's full record. 100% = right on median; 200% = a very high year; 30% = a drought-level low.

What are flood stages, and is this river safe right now?

Flood stages are NWS-defined gage-height thresholds — Action, Minor, Moderate, Major — marking when nearby roads or floodplains start to be affected. "Safe" depends on your activity and skill: a level that's a fun paddle for an expert can be lethal for a wader. Always check the current level against the thresholds above and the safety links, and when in doubt, stay off the water.

Can I get alerts when Middle Fork Willamette River Near Dexter rises?

Yes — flow alerts are managed in the Snoflo iOS app. Favorite this gauge, set a streamflow threshold (e.g. "alert me when discharge crosses 5,000 cfs"), and you'll get a push the moment USGS reports the crossing.