Juniata Dam
Juniata
Juniata is a vital water resource located in Mesa, Colorado, specifically in the city of Whitewater. Completed in 1979, this earth dam stands at a height of 98 feet, with a hydraulic height of 110 feet, providing water supply for various purposes such as fish and wildlife ponds, recreation, and water supply. With a storage capacity of 8,074 acre-feet and a normal storage of 7,281 acre-feet, Juniata covers a surface area of 150 acres and serves a drainage area of 2 square miles.
Managed by the local government and regulated by the Colorado Department of Water Resources, Juniata has a spillway width of 30 feet and is equipped with slide and uncontrolled outlet gates. Despite being classified as having a high hazard potential, the dam's condition assessment is rated as fair, with the last inspection conducted in April 2020. Juniata poses a moderate risk, with risk management measures yet to be detailed. Overall, Juniata serves as a crucial water source for the region, supporting both environmental and recreational needs while highlighting the importance of proper maintenance and monitoring in ensuring its safety and longevity.
Inside the reservoir
The real shoreline of this water body, with a depth model scaled so the basin holds exactly its recorded storage. Drag to orbit, scroll to zoom, and use the slider to drain and refill it. Click anywhere on the basin for the modelled depth there.
NID normal pool storage (7281 AF) over this shoreline implies a 158 ft basin, deeper than the 98 ft dam. Depth capped to the dam; storage shown is modelled, not NID.
How this is built. The shoreline is the National Hydrography
Dataset polygon for this water body (“Juniata Reservoir”),
matched to the dam by proximity and confirmed by comparing its area with the
National Inventory of Dams surface area (agreement 0.641×).
Depth is modelled, not surveyed: the basin is shaped by distance from
shore — deep in open water, shallow in the bays — and scaled so its
volume equals the recorded storage. No national bathymetric survey exists for
US reservoirs. Treat the shoreline, area and volume as measured, and the depth
distribution as an informed approximation.
Above normal pool, water is shown rising within the normal-pool
shoreline. Where it would actually spread depends on the surrounding
terrain, which is not modelled here — a reservoir in a steep canyon barely
widens, one on flat ground can spread a long way. This is a depth and volume
figure, not an inundation map. Official inundation mapping for a dam
comes from its Emergency Action Plan.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Juniata -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Gunnison River Near Grand Junction | 1,580 cfs | → |
| Colo River Blw Grd Valley Div Nr Palisade Co | 117 cfs | → |
| Plateau Creek Near Cameo | 19 cfs | → |
| Gunnison River At Delta | 624 cfs | → |
| Colorado River Near Cameo | 1,240 cfs | → |
| Uncompahgre River At Delta | 391 cfs | → |
About Juniata
Where does the data for Juniata come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the High hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card below for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Create a free account, or sign in.
Get the free Juniata report — alerts, favorites, and history & forecasts, plus the free iPhone app.